Rain Bird WS PRO LT Specifications download pdf (Page 23)

TECH SPECS

WS-PRO2 Weather Station

Maxicom

2

® & SiteControl Central Control Systems

The WS-PRO2 Weather Station collects and

stores weather data from ﬁeld locations. This

information is retrieved by the Central Control-

ler daily, allowing Maxicom

2

® & SiteControl to

adjust station run time and/or schedule day

cycle frequency according to each day’s ET

(evapotranspiration) and rainfall.

WS-PRO2 Weather Stations are highly ac-

curate, durable, and reliable. They are built

using the highest quality sensors available and

will provide years of reliable data even in the

toughest environments. An on-board data-

logger continually polls the sensors which

measure air temperature, relative humidity,

wind speed and direction, rainfall and solar

radiation.

Weather Station Features

• Rugged yet lightweight metal construction

• Powerful internal micro-logger for data

collection, logging, analysis, constant

communication with sensors, and storage

of 30 days of data

• Sensors monitor 6 ET/weather parameters:

air temperature (high & low), solar radiation,

relative humidity, wind speed, and rainfall –

Wind direction is also measured

• Sensors located 3 meters above ground for

added vandal resistance

• Simple-to-service sensors and internal

components

• Self-diagnostic test mechanisms: internal

moisture, battery voltage level, and test

port for local sensor check

• Internal battery charged by 120 VAC/16

VDC transformer or optional solar panels

Maxicom

2

® Features

• WS-PRO2 Weather Station compatibility

is standard for Maxicom

2

® v3.6 or later

software

• Each site can have its own Weather Station

or can share between sites

• Automatic communication standard

• Up to 24 automatic weather data retrievals

can be conﬁgured per day

SiteControl Features

• WS-PRO2 Weather Station compatibility

is standard for SiteControl v3.0 or later

software

• SiteControl can interface with up to 6

weather stations

• Automatic communication between

Central Controller and Weather Station

requires SiteControl Automatic ET Software

Module

• SiteControl Smart Weather Software

Module enables automatic, user deﬁned

reactions to weather events (rain, freeze,

high wind, etc.)

Models

• WS-PRO2-DC Direct Connect model – 2-pair

wire connection with Central Controller via

short-haul modem

• WS-PRO2-PH Phone Connect model

– dial-up phone modem for phone

communication with Central Controller

• WS-PRO2-PHS Phone Connect, Solar Power

model – dial-up phone modem for phone

communication with Central Controller,

solar powered

Sensor Speciﬁcations

• Air Temperature Sensor:

Range -13° to +122°F (-25° to +50°C)

Accuracy +/- 2.7°F (+/- 1.5°C)

• Relative Humidity Sensor:

Range 0 to 100%

Accuracy +/- 6% @ 90% to 100% RH,

+/- 3% @ 0% to 90% RH

• Rain Gauge Sensor:

Resolution 0.01” (0.25 mm)

• Solar Radiation Sensor:

Accuracy +/- 3%

• Wind Speed Sensor:

Starting threshold 0.9 mph (0.4 m s-1)

• Wind Direction Sensor:

Range 360° mechanical, 356° electrical,

accuracy +/- 4°

Electrical Speciﬁcations

• Input required:

9.6 to 16VDC from transformer (120 VAC/16

VDC transformer provided with powered

stations) or solar panels

• Power backup: “Gel-cell” 12 VDC battery

(provided with station)

How to Specify/Order

WS - PRO2 - PH

Series

WS-PRO2

Model

DC - Direct Connect

PH - Phone Connect

PHS - Phone Connect/

Solar Powered

How to Specify/Order

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 51 52

Comments to this Manuals

No comments