ET Manager Wiring
• Remove the jumper on the ET Manager terminal labeled “Jumper.”
ET and Rain Pulse
• ET Pulse: Use a pair of wires connected to the ET Manager ET pulse output terminals, labeled NOA
and A. Select the Maxicom
2
hardware input:
- Maxicom
2
Pulse Decoder input: Connect to the blue and blue/white wires.
- Maxicom
2
ESP-SITE-Satellite or ESP-SAT Link-Radio Satellite input: Connect to either sen-
sor input A or B.
• Rain Pulse: Use a pair of wires connected to the ET Manager ET pulse output terminals, labeled NOB
and B. Select the Maxicom
2
hardware input:
- Maxicom
2
Pulse Decoder input: Connect to the blue and blue/white wires.
- Maxicom
2
ESP-SITE-Satellite or ESP-SAT Link-Radio Satellite input: Connect to either sen-
sor input A or B.
Note: The Maxicom
2
ESP-SITE-Satellite or ESP-SAT Link-Radio Satellite currently does not support two
weather inputs. Select either an ET or Rain input to one satellite.
ET Pulse with Weather Interrupt
• ET Pulse: Use a pair of wires connected to the ET Manager ET pulse output terminals, labeled NOA
and A. Select the hardware input:
- Maxicom
2
Pulse Decoder input: Connect to the blue and blue/white wires.
- Maxicom
2
ESP-SITE-Satellite or ESP-SAT Link-Radio Satellite input: Connect to either sen-
sor input A or B.
• Weather Interrupt: Use a pair of wires connected to the ET Manager Weather Interrupt terminals,
labeled COM and B. Select the hardware input:
- Maxicom
2
Sensor Decoder input: Connect to the two yellow wires.
- Maxicom
2
ESP-SITE-Satellite or ESP-SAT Link-Radio Satellite input: Connect to either sen-
sor input A or B.
ET Manager System Settings
• ET and Rain Pulse:
- Output Method = ET and Rain Pulse
- Rain Source = Broadcast
- Pulse per Minute = 10
- ET Pulse Duration = 0.2 seconds
- Rain Pulse Duration = 0.2 seconds
48 ET Manager Application Notes
Comments to this Manuals